Deprecated: Function get_magic_quotes_gpc() is deprecated in /home/customer/www/diy-video.com/public_html/include/functions.php on line 3504

Deprecated: Function get_magic_quotes_gpc() is deprecated in /home/customer/www/diy-video.com/public_html/include/functions.php on line 3504
Woodworking videos - RSS Feed http://www.diy-video.com/browse-woodworking-videos-videos-1-date.html diy video is the webs premium site for all DIY related videos and home improvement videos How to make a feather edge garden gate http://www.diy-video.com/how-to-make-a-feather-edge-garden-gate_1ab99fe93.html

This video shows how to make an inexpensive garden gate using some 4 inch by 2 inch tantalised timber and some feather edge tantalised boards. This is probably the cheapest garden gate you could ever make!

]]>
Thu, 23 Jul 2015 21:14:27 +0000 How to make a feather edge garden gate <![CDATA[<p><img src="http://www.diy-video.com/uploads/thumbs/1ab99fe93-1.jpg" /></p><p>This video shows how to make an inexpensive garden gate using some 4 inch by 2 inch tantalised timber and some feather edge tantalised boards. This is probably the cheapest garden gate you could ever make!</p>]]> http://www.diy-video.com/how-to-make-a-feather-edge-garden-gate_1ab99fe93.html
Overhead garage storage rack http://www.diy-video.com/overhead-garage-storage-rack_e9ac5b7f5.html

The space above a garage door is often wasted and never utilised. This video shows how to make some useful hangers which allows long lengths of material to be stored in the space above where the garage door opens. These hangers will be used for storing 3 metre lengths of timber and pipe etc. This is an interesting project and uses both biscuit joints and pocket hole butt joints to make the rack

]]>
Thu, 23 Jul 2015 21:11:33 +0000 Overhead garage storage rack <![CDATA[<p><img src="http://www.diy-video.com/uploads/thumbs/e9ac5b7f5-1.jpg" /></p><p>The space above a garage door is often wasted and never utilised. This video shows how to make some useful hangers which allows long lengths of material to be stored in the space above where the garage door opens. These hangers will be used for storing 3 metre lengths of timber and pipe etc. This is an interesting project and uses both biscuit joints and pocket hole butt joints to make the rack</p>]]> http://www.diy-video.com/overhead-garage-storage-rack_e9ac5b7f5.html
How to sharpen a spade wood bit http://www.diy-video.com/how-to-sharpen-a-spade-wood-bit_077a69497.html

This video shows How to sharpen a spade wood bit using a file. This can be done very quickly and makes a massive difference when drilling wood. A blunt drill bit is inefficient and tends to burn the timber on the way through, as sharp spade wood bit will cut its way through even the toughest of timber providing the drill is powerful enough.
 

]]>
Thu, 23 Jul 2015 21:08:20 +0000 How to sharpen a spade wood bit <![CDATA[<p><img src="http://www.diy-video.com/uploads/thumbs/077a69497-1.jpg" /></p><p>This video shows How to sharpen a spade wood bit using a file. This can be done very quickly and makes a massive difference when drilling wood. A blunt drill bit is inefficient and tends to burn the timber on the way through, as sharp spade wood bit will cut its way through even the toughest of timber providing the drill is powerful enough.<br /> </p>]]> http://www.diy-video.com/how-to-sharpen-a-spade-wood-bit_077a69497.html
How to make a timber file rack http://www.diy-video.com/how-to-make-a-timber-file-rack_19d6d6039.html

In this video I make a file rack for engineer’s files using an offcut of timber. The piece of 6” by 2” timber is trenched out using the sliding chop saw, this then enables engineers files to be stored in the trenches. This is a very easy item to make providing you have a decent sliding miter saw.

]]>
Thu, 23 Jul 2015 21:05:29 +0000 How to make a timber file rack <![CDATA[<p><img src="http://www.diy-video.com/uploads/thumbs/19d6d6039-1.jpg" /></p><p>In this video I make a file rack for engineer’s files using an offcut of timber. The piece of 6” by 2” timber is trenched out using the sliding chop saw, this then enables engineers files to be stored in the trenches. This is a very easy item to make providing you have a decent sliding miter saw.</p>]]> http://www.diy-video.com/how-to-make-a-timber-file-rack_19d6d6039.html
Timber thread inserts http://www.diy-video.com/timber-thread-inserts_0b7acc4da.html

Timber thread inserts are very useful as they can be tightened and loosened an unlimited amount of times. If you tighten and loosen a normal wood screw eventually it will enlarge the hole and will not grip as well, by using timber thread inserts you can overcome this problem. The timber thread inserts are also self-cutting so you simply drill the correct size hole and the insert will cut its own thread when it is screwed into position. Timber thread inserts can also be used when fixing to the edge of another piece of timber, making them extremely useful.

]]>
Thu, 23 Jul 2015 21:02:49 +0000 Timber thread inserts <![CDATA[<p><img src="http://www.diy-video.com/uploads/thumbs/0b7acc4da-1.jpg" /></p><p>Timber thread inserts are very useful as they can be tightened and loosened an unlimited amount of times. If you tighten and loosen a normal wood screw eventually it will enlarge the hole and will not grip as well, by using timber thread inserts you can overcome this problem. The timber thread inserts are also self-cutting so you simply drill the correct size hole and the insert will cut its own thread when it is screwed into position. Timber thread inserts can also be used when fixing to the edge of another piece of timber, making them extremely useful.</p>]]> http://www.diy-video.com/timber-thread-inserts_0b7acc4da.html
How to build a timber garden gate http://www.diy-video.com/how-to-build-a-timber-garden-gate_dc66b4b2e.html

This small gate has been made for an opening at the bottom of the garden. It is made from tongue and grove redwood, which is harder then traditional pine as it is grown slower. Once built this gate was given three coats of fence paint to ensure it lasts for years.

]]>
Thu, 23 Jul 2015 20:57:32 +0000 How to build a timber garden gate <![CDATA[<p><img src="http://www.diy-video.com/uploads/thumbs/dc66b4b2e-1.jpg" /></p><p>This small gate has been made for an opening at the bottom of the garden. It is made from tongue and grove redwood, which is harder then traditional pine as it is grown slower. Once built this gate was given three coats of fence paint to ensure it lasts for years.</p>]]> http://www.diy-video.com/how-to-build-a-timber-garden-gate_dc66b4b2e.html
How to make a feather edge fence panel http://www.diy-video.com/how-to-make-a-feather-edge-fence-panel_8d150e5c6.html

Feather edge fence panels can be bought pre-made, however you can make the panels yourself and can make them from the best materials and ensure that all cut edges are treated with wood preserver. This is a relatively easy project and the panels should last for years once they have been treated again with fence preserver.

]]>
Thu, 23 Jul 2015 20:52:02 +0000 How to make a feather edge fence panel <![CDATA[<p><img src="http://www.diy-video.com/uploads/thumbs/8d150e5c6-1.jpg" /></p><p>Feather edge fence panels can be bought pre-made, however you can make the panels yourself and can make them from the best materials and ensure that all cut edges are treated with wood preserver. This is a relatively easy project and the panels should last for years once they have been treated again with fence preserver.</p>]]> http://www.diy-video.com/how-to-make-a-feather-edge-fence-panel_8d150e5c6.html
How to use a biscuit joiner http://www.diy-video.com/how-to-use-a-biscuit-joiner_8f4e5db84.html

A biscuit joiner, sometimes called a biscuit jointer or plate jointer is useful when making biscuit joints. When used in conjunction with beech biscuits and wood glue it is possible to make a really strong joint.

]]>
Thu, 23 Jul 2015 20:49:23 +0000 How to use a biscuit joiner <![CDATA[<p><img src="http://www.diy-video.com/uploads/thumbs/8f4e5db84-1.jpg" /></p><p>A biscuit joiner, sometimes called a biscuit jointer or plate jointer is useful when making biscuit joints. When used in conjunction with beech biscuits and wood glue it is possible to make a really strong joint.</p>]]> http://www.diy-video.com/how-to-use-a-biscuit-joiner_8f4e5db84.html
Treating Timber cut ends http://www.diy-video.com/treating-timber-cut-ends_3f2122df5.html

Once a piece of timber is cut it makes it particularly vulnerable to penetration from water, which eventually will rot the timber. This video shows how to quickly treat the cut ends by standing them up in some wood preserver. The capillary action then sucks the preserver up the timber, which then prevents the water from damaging it at a later date.

]]>
Thu, 23 Jul 2015 20:46:04 +0000 Treating Timber cut ends <![CDATA[<p><img src="http://www.diy-video.com/uploads/thumbs/3f2122df5-1.jpg" /></p><p>Once a piece of timber is cut it makes it particularly vulnerable to penetration from water, which eventually will rot the timber. This video shows how to quickly treat the cut ends by standing them up in some wood preserver. The capillary action then sucks the preserver up the timber, which then prevents the water from damaging it at a later date.</p>]]> http://www.diy-video.com/treating-timber-cut-ends_3f2122df5.html
How to Shape timber using an angle grinder http://www.diy-video.com/how-to-shape-timber-using-an-angle-grinder_fd5b40013.html

Timber can quickly be shaped using a flexible sanding disk and an angle grinder. This is a very quick but dusty way of removing large amounts of material very quickly.

]]>
Thu, 23 Jul 2015 20:43:07 +0000 How to Shape timber using an angle grinder <![CDATA[<p><img src="http://www.diy-video.com/uploads/thumbs/fd5b40013-1.jpg" /></p><p>Timber can quickly be shaped using a flexible sanding disk and an angle grinder. This is a very quick but dusty way of removing large amounts of material very quickly.</p>]]> http://www.diy-video.com/how-to-shape-timber-using-an-angle-grinder_fd5b40013.html
How to make a Butt joint http://www.diy-video.com/how-to-make-a-butt-joint_c9abc9d57.html

A butt joint is probably the most common type of joint in woodworking but it is also probably the weakest. This video shows how to make a simple butt joint using self countersinking screws.

]]>
Thu, 23 Jul 2015 20:39:58 +0000 How to make a Butt joint <![CDATA[<p><img src="http://www.diy-video.com/uploads/thumbs/c9abc9d57-1.jpg" /></p><p>A butt joint is probably the most common type of joint in woodworking but it is also probably the weakest. This video shows how to make a simple butt joint using self countersinking screws.</p>]]> http://www.diy-video.com/how-to-make-a-butt-joint_c9abc9d57.html
How to make a miter joint http://www.diy-video.com/how-to-make-a-miter-joint_682d81d63.html

Miter joints are very common in woodworking and are relatively easy to make. This video shows how to cut and join a miter joint quickly and easily.

]]>
Thu, 23 Jul 2015 20:36:53 +0000 How to make a miter joint <![CDATA[<p><img src="http://www.diy-video.com/uploads/thumbs/682d81d63-1.jpg" /></p><p>Miter joints are very common in woodworking and are relatively easy to make. This video shows how to cut and join a miter joint quickly and easily.</p>]]> http://www.diy-video.com/how-to-make-a-miter-joint_682d81d63.html